Vol. 14 No. 1 (2024): Maret 2024

View Vol. 14 No. 1 (2024): Maret 2024
Published: 2024-03-31

Full Issue

Articles

  • SMKN 2 SURABAYA SEBAGAI PENYEDIA JASA PERHITUNGAN RENCANA ANGGARAN BIAYA (RAB)

    Retno Sri Herdianti, Yunaidi Supriyanto
    1-10
    DOI: https://doi.org/10.35457/quateknika.v14i1.3328

  • USAHA PELATIHAN KETERAMPILAN DI BIDANG PEKERJAAN KAYU SEBAGAI UPAYA KEBERMANFAATAN ALAT DI SMKN SURABAYA

    Dyah Ayu Pangastuti Ardiani, Andang Widjaya, Yunaidi Supriyanto , Yunaidi Supriyanto
    11-17
    DOI: https://doi.org/10.35457/quateknika.v14i1.3327

  • ANALYSIS OF MODE SELECTION OF PASSENGER TRANSPORTATION BETWEEN BUS AND TRAIN ON THE MALANG-SURABAYA ROUTE (CASE STUDY OF PATAS BUS AND JAYABAYA RAIL)

    M. Sadillah -, Rifky Aldila Primasworo, Flafianus Egar
    18-28
    DOI: https://doi.org/10.35457/quateknika.v14i1.3135

  • ESTIMATING GROUND WATER LEVEL USING THE ELKTROMAGNET METHOD

    Gregorius Aryoko Gautama, Dandung Novianto, Agus Suhardono
    29-39
    DOI: https://doi.org/10.35457/quateknika.v14i1.3470

  • PEMETAAN POTENSI UNGGULAN INDUSTRI RUMAH TANGGA (HOME INDUSTRY) DI DESA JEDONG KABUPATEN MALANG

    Rifky Aldila Primasworo Rifky, Pamela Dinar Rahma, Eva Ayu Lestari
    40-52
    DOI: https://doi.org/10.35457/quateknika.v14i1.3173

  • ANALYSIS OF ROAD DAMAGE DETECTION USING ORTHOPHOTO MAP FROM UNMANNED AERIAL VEHICLE (UAV-PHOTOGRAMMETRY)

    Helik Susilo, Martince Novianti Bani, Muhammad Tri Aditya, Eri Cahyani, Achendri M. Kurniawan
    53-65
    DOI: https://doi.org/10.35457/quateknika.v14i1.3258

  • PROVISION OF WORKING DRAWING DESIGN SERVICES AS THE IMPLEMENTATION OF ENTREPRENEURIAL READINESS FOR STUDENTS OF VOCATIONAL SCHOOL 2 SURABAYA DPIB DEPARTMENT

    Moh Faisal Faris, Andang Widjaja, Yunaidi Supriyanto
    66-74
    DOI: https://doi.org/10.35457/quateknika.v14i1.3325

  • CORRELATION ANALYSIS OF MUTUAL CHECK (MC), WORK DRAWINGS AND HUMAN RESOURCES ON THE PROGRESS OF CONSTRUCTION WORK

    Nurjanah, Hangga Prima, Ahmad Amru Salsabil
    75-86
    DOI: https://doi.org/10.35457/quateknika.v14i1.3536

  • CONVEYOR BELT DAN ALAT PENGHITUNG OTOMATIS BERBASIS ARDUINO NANO MENGGUNAKAN SENSOR INFRAMERAH PADA PRODUKSI ROTI TAWAR

    Mukhlison, Sri Widoretno, Ava Muhamad Alsa Fahri Mahardika
    87-99
    DOI: https://doi.org/10.35457/quateknika.v14i1.3495

  • PERANCANGAN DAN PEMBUATAN ALAT SANGRAI KOPI OTOMATIS MENGGUNAKAN ARDUINO UNO DILENGKAPI DENGAN TIMER Yandy Kurniawan Syah1), Alvin Zuhair, M.T2), Devis Yusofa, M.Pd.3), Mukhlison, S.T., M.T4), Sri Widoretno, S.T., M.T5)

    Alvin
    100-106
    DOI: https://doi.org/10.35457/quateknika.v14i1.3535

  • SIMULASI DISTRIBUSI MUATAN DISKRIT PADA KAWAT KONDUKTOR PERSEGI

    Syamsudin Nur Wahid
    107 - 115
    DOI: https://doi.org/10.35457/quateknika.v14i1.3778