CONVEYOR BELT DAN ALAT PENGHITUNG OTOMATIS BERBASIS ARDUINO NANO MENGGUNAKAN SENSOR INFRAMERAH PADA PRODUKSI ROTI TAWAR
Abstract
Bread is a staple food that is often consumed by Indonesian people and is made from wheat flour. In Indonesia, there are many small-scale bakery industries that continue to thrive despite the economic crisis. Seeing the rapid development of the bakery industry, product innovation is needed to improve business. One of them is making bread products with various variations. Not only that, bread industry entrepreneurs must know the latest trends and technology so they can adapt to current developments. Production of bread in large quantities means that bread calculations require a fast time, so producers must have tools that can increase effectiveness in production. Manufacturers need tools to count hundreds, thousands or even millions of goods. So this final project will design a conveyor belt and automatic counting device based on Arduino Nano using infrared sensors for the production of white bread. This prototype utilizes Arduino Nano and Arduino Nano components, Servo Motor, Ultrasonic Sensor, 20 x 4 LCDD, and a drive system in the form of a conveyor. It was then concluded that with this tool, the effectiveness of calculating bread production would increase, and shorten the time for producers and workers in calculating the amount of product produced.
References
Amrulloh, A. G. (2015). Implementation of Human Motion Detector With Passive Infrared Censor As Camera Direction Control and Control System Lock Door and Window Using Microcontroller. Universitas Telkom.
Arief, U. M. (2011). Pengujian sensor ultrasonik ping untuk pengukuran level ketinggian dan volume air. Jurnal Ilmiah Elektrikal Enjiniring UNHAS, 9(2), 72-77.
Arijaya, I. M. N. (2019). Rancang Bangun Alat Konveyor Untuk Sistem Soltir Barang Berbasis Mikrokontroler Arduino Uno. Jurnal RESISTOR (Rekayasa Sistem Komputer), 2(2), 126–135. https://doi.org/10.31598/jurnalresistor.v2i2.363
Berliana, N. E. (2022). Perkembangan Industri Roti di Indonesia. In Kumparan.com (p. Perkembangan Industri Roti di Indonesia). https://kumparan.com/nandhita-evieta/perkembangan-industri-roti-di-indonesia-1xpcN747gHo/2
Erwansyah, K. (2021). Implementasi Data Mining Mengestimasi Jumlah Produksi Roti Tawar dan Roti Tawar Kupas Berdasarkan Transaksi pada 32 Toko Retail Di Sumatera Utara dengan Menggunakan Metode Regresi Linier Berganda pada PT. Arma Anugrah Abadi. Jurnal Cyber Tech, 1(2).
Haryanto, D., & Wijaya, R. I. (2019). Tempat sampah membuka dan menutup otomatis menggunakan sensor inframerah berbasis arduino uno. Jumantaka: Jurnal Manajemen Dan Teknik Informatika, 03(1), 151–160. http://jurnal.stmik-dci.ac.id/index.php/jumantaka/article/view/364
Hidayat, M. S., Pagiling, L., & Nur, M. N. A. (2019). Perancangan Sistem Pengepakan Otomatis Berbasis Arduino Uno Menggunakan Sensor Jarak Infra Red. Perancangan Sistem Pemilah Otomatis Berbasis Arduino Uno Menggunakan Sensor Jarak Infra red.
Lestari, N. (2018). Rancang Bangun Monitoring Bendungan Otomatis Berbasis Web Pada Bendungan Irigasi Di Desa G2 Dwijaya Kecamatan Tugumulyo Kabupaten Musi Rawas. Jurnal Sistem Komputer Musirawas (JUSIKOM), 3(2), 93. https://doi.org/10.32767/jusikom.v3i2.329
Lestari, N., Satrianansyah, & Mutia, B. (2019). Monitoring Penanggulangan Banjir dan Alarm Otomatis Berbasis Internet of Things (IoT) Di Dinas Sosial Unit Tagana Kota Lubuklinggau. Jurnal Sistem Komputer Musirawas, 04(02), 75–84.
Rukmana, A. C., & Ro’uf, A. Aplikasi Sensor Load Cell pada Purwarupa, 2014.
Sadi, S. (2018). Rancang Bangun Monitoring Ketinggian Air Dan Sistem Kontrol Pada Pintu Air. Jurnal Teknik, Vol. 7(1), hlm. 77-91.
Saleh, M., & Haryanti, M. (2017). Rancang Bangun Sistem Keamanan Rumah Menggunakan Relay . Jurnal Teknologi Elektro, Universitas Mercu Buana, 8(2), 87–94. https://media.neliti.com/media/publications/141935-ID-perancangan-simulasi-sistem-pemantauan-p.pdf
Sokop, S. J., Mamahit, D. J., Eng, M., Sompie, S. R. U. A., Mahasiswa, ), &Pembimbing, ). (2016). Trainer Periferal Antarmuka Berbasis Mikrokontroler Arduino Uno. Jurnal Teknik Elektro Dan Komputer, 5(3), 13–23. https://ejournal.unsrat.ac.id/index.php/elekdankom/article/view/11999
Susila, A., Aji, W. S., & Sutikno, T. P (2007) Alat Pemilah Barang.
Wijaya, A. (2017). Aplikasi Extruder Menggunakan Sensor Suhu Pada Alat Pencetak Akrilik Tiga Dimensi. POLITEKNIK NEGERI SRIWIJAYA.
Copyright (c) 2024 Jurnal Qua Teknika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
