APPLICATION OF VALUE ENGINEERING TO THE CONSTRUCTION PROJECT OF THE CAMPUS 2 BUILDING AT POLITEKNIK NEGERI MADIUN
PENERAPAN VALUE ENGINEERING PADA PROYEK PEMBANGUNAN GEDUNG KAMPUS 2 POLITEKNIK NEGERI MADIUN
DOI:
https://doi.org/10.35457/quateknika.v16i02.5983Keywords:
Cost Model, Function Analysis, Pareto Analysis, Structural work cost efficiency, Value EngineeringAbstract
This study aims to identify dominant work items with potential unnecessary cost, formulate efficient alternatives, and calculate the resulting cost savings through Value Engineering (VE) on the Campus 2 Building Construction Project of the State Polytechnic of Madiun, valued at Rp51,191,994,221. A quantitative method was applied through four VE job-plan stages: information (cost model, breakdown, Pareto analysis), creative, analysis, and recommendation. Pareto analysis showed that structural work, particularly slab, beam, and column, had a cost/worth ratio above 1. Substituting brands of ready-mix concrete, reinforcing steel, site-mix cement, and vendors produced savings of Rp689,155,863 (4.27%) in structural work and Rp764,963,008 (1.49%) of total project cost. VE proved effective in optimizing construction costs without compromising building function and quality.
Downloads
References
[1] Ariva, F. B. (2020). Penerapan value engineering pada proyek pembangunan rumah swadaya (Studi kasus: Program BSPS di Desa Siasem Brebes). Spectra, 9(17), 48-57.
[2] Dell'Isola, A. J. (1997). Value engineering: Practical applications for design, construction, maintenance and operations. RSMeans.
[3] Naufal Rabbani Ahmad, & Fauzi Akbar Rahmawan. (2025). Implementasi value engineering pekerjaan arsitektur pada proyek konstruksi gedung perkuliahan di Jawa Timur. 6(September), 334-340.
[4] Noviyanti, E., Wibowo, K., & Ni'am, M. F. (2022). Analisis value engineering pada proyek perumahan Pesona Griya Asri di Kabupaten Kudus. Menara: Jurnal Teknik Sipil, 17(1), 1-8. https://doi.org/10.21009/jmenara.v17i1.25141
[5] Rani, H. A. (2022). Konsep value engineering dalam manajemen proyek konstruksi.
[6] Waruwu, M., Natijatul, S., Utami, P. R., & Yanti, E. (2025). Metode penelitian kuantitatif: Konsep, jenis, tahapan dan kelebihan. 10, 917-932.
[7] Yolyapri, F., Revantoro, N. B., & Santoso, E. (2024). Penerapan value engineering terhadap pekerjaan struktur atas pada proyek pembangunan Malang Creative Center.
[8] Yohanes Mosa Temu, Octaviani, M., Abiarto, W., & Kuncaravita, S. A. (2023). Penerapan metode value engineering pada proyek pembangunan gedung fasilitas layanan perpustakaan Kabupaten Flores Timur. Insight Mediatama, 03(April).
[9] Yunus, A., Bina, K., & Ekawati. (2020). Analisis upaya manajemen K3 dalam pencegahan dan pengendalian. Jurnal Kesehatan Masyarakat, 8(September), 1-6.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jurnal Qua Teknika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
How to Cite
