TEKNOLOGI PAKAN KUCING OTOMATIS DENGAN SISTEM BUKA TUTUP MENGGUNAKAN DINAMO, SERVO, DAN SENSOR LIMIT SWITCH BERBASIS ARDUINO UNO
Abstract
Pet welfare is a human right that belongs to the animal itself. However, this does not get enough attention from the public or pet owners. Judging from the owner's lack of knowledge of the pets they own and the lack of facilities that support the welfare of the pets themselves. Inefficient and ineffective feeding of cats will affect the animal's diet. Because irregular eating patterns can cause digestive disorders in cats. For this reason, an automatic mechanism is needed that can be used to help feed pets according to the right time and dose. So that this final project will design and build an Automatic Cat Feeding Tool with an Open and Close System Using a Dynamo, Servo, and Sensor Limit Switch which is composed of several connected programs and is based on Arduino Uno. With the existence of an automatic cat feeding device, it is hoped that it can overcome the problems faced by cat owners. Apart from that, it can also save costs, increase the time and energy efficiency of cat owners, and can create a sense of calm for cat owners when leaving their pets at home even without full supervision
References
Alfi, R. N., Hijjayanti, K., Saptoaji, N., & Rizal, A. (2019). Analisis Perbandingan Kecepatan Transfer Data Dengan Kabel USB Tipe A Dan USB Tipe C. NJCA (Nusantara Journal of Computers and Its Applications), 4(2), 144. https://doi.org/10.36564/njca.v4i2.156
Boko, I. A. (2021). ALAT AUTOMATIC PET FEEDER MIXER MENGGUNKAN WEMOS D1 BERBASIS MOBILE PHONE. In Frontiers in Neuroscience (Vol. 14, Issue 1). UNIVERSITAS MUHAMMADIYAH SUMATERA UTARA.
Devitasari, R., & Kartika, K. P. (2020). Rancang Bangun Alat Pemberi Pakan Kucing Otomatis Menggunakan Mikrokontroler Nodemcu Berbasis Internet of Things (IoT). 14(2), 152–164.
Haryanto, D., & Wijaya, R. I. (2019). Tempat sampah membuka dan menutup otomatis menggunakan sensor inframerah berbasis arduino uno. Jumantaka: Jurnal Manajemen Dan Teknik Informatika, 03(1), 151–160. http://jurnal.stmik-dci.ac.id/index.php/jumantaka/article/view/364
Indrihastuti, N., Thohirin, A., & Karsina, D. (2019). Perencanaan Pengisi Daya Sederhana Memanfaatkan Dinamo Sepeda. Cahaya Bagaskara, 4(1), 7–10. https://jurnal.umpp.ac.id/index.php/cahaya
Jatmika, S., Aprilianto, T., & Burhanudin, D. (2022). Sistem Smart Gate Dengan Menggunakan Wastafel Dan Sensor Suhu Touchless Sensor Berbasis Fuzyy Logic Control. Positif: Jurnal Sistem dan Teknologi Informasi, 8(1), 8-17.
Khair, U., & Sabrina, T. (2019). Alat Pemberi Makan Kucing Otomatis Berbasis Arduino Uno Pada Pet Shop. Sebatik, 23(1), 9–14. https://doi.org/10.46984/sebatik.v23i1.437
Lestari, N., Satrianansyah, & Mutia, B. (2019). Monitoring Penanggulangan Banjir dan Alarm Otomatis Berbasis Internet of Things (IoT) Di Dinas Sosial Unit Tagana Kota Lubuklinggau. Jurnal Sistem Komputer Musirawas, 04(02), 75–84.
Lestari, N. (2018). Rancang Bangun Monitoring Bendungan Otomatis Berbasis Web Pada Bendungan Irigasi Di Desa G2 Dwijaya Kecamatan Tugumulyo Kabupaten Musi Rawas. Jurnal Sistem Komputer Musirawas (JUSIKOM), 3(2), 93. https://doi.org/10.32767/jusikom.v3i2.329
Salvana, W. 2008. Pentingnya Menyaga Pola Makan. Jakarta: Gramedia Pustaka Utama.
Sokop, S. J., Mamahit, D. J., Eng, M., Sompie, S. R. U. A., Mahasiswa, ), & Pembimbing, ). (2016). Trainer Periferal Antarmuka Berbasis Mikrokontroler Arduino Uno. Jurnal Teknik Elektro Dan Komputer, 5(3), 13–23.
Sutarti, S., Triyatna, T., & Ardiansyah, S. (2022). PROTOTYPE SISTEM ABSENSI SISWA/I DENGAN MENGGUNAKAN SENSOR RFID BERBASIS ARDUINO UNO. PROSISKO: Jurnal Pengembangan Riset dan Observasi Sistem Komputer, 9(1), 76-85.
Syofian, A. (2016). Pengendalian Pintu Pagar Geser Menggunakan Aplikasi Smartphone Android dan Mikrokontroler Arduino Melalui Bluetooth. Jurnal Teknik Elektro, 5(1), 45-50.
Wijaya, A. (2017). Aplikasi Extruder Menggunakan Sensor Suhu Pada Alat Pencetak Akrilik Tiga Dimensi. POLITEKNIK NEGERI SRIWIJAYA.
Copyright (c) 2024 Jurnal Qua Teknika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License