REKAYASA PINTU GESER OTOMATIS DENGAN MENGGUNAKAN SENSOR PASSIVE INFRA RED (PIR)
Along with the rapid development of the times, in everyday life in the field of technology. This has encouraged humans to create and innovate in the field of technology to create a tool that can facilitate human activities. The door is something that is insulated inside the house and outside the home. The door in general as access into and out of the house or outside the home. Generally the door is opened manually by sliding because opening and closing the door does not take up much space for the mechanism of opening and closing the door so that most doors are opened with a manual mechanism. Current technological developments have also affected the door open and close system so that the door can be opened and closed automatically by using the Passive Infra Red Sensor (PIR).This simulation tool consists of a DC motor controller circuit and a sensor that is regulated by a microcontroller system with the input sensor. In a DC motor controller circuit, the direction of rotation and speed is regulated by the motor driver. As for the sensor circuit, it is used as a motion detector. For the microcontroller as a controller, selected from the type of Arduino Uno with Arduino programming. In the process of control, the sliding door will move to open and close the door either or not move according to PIR sensor input. The control system that is designed here only uses two commands at regular intervals in a single program execution, both the calling and the intended purpose of the user.
S. Prayogi, "PINTU OTOMATIS MENGGUNAKAN SENSOR PASSIVE INFRARED (PIR) DENGAN ARDUINO," STMIK AKAKOM Yogyakarta, Yogyakarta, 2016.
T. T. BOZU, "Sensor PIR (Passive Infra Red)," PERRONYCS Corp, 14 Juli 2011. [Online]. Available: http://sainsdanteknologiku.blogspot.com/2011/07/sensor-pir-passive-infra-red.html.
A. R. Mahassin, "Implementasi Sistem Peminjaman dan Pengembalian Buku dengan Teknologi RFID di Perpustakaan Jurusan Teknik Elektro," Universitas Negeri Semarang, Semarang, 2016.
S. Ariyanti, S. S. Adi and S. Purbawanto, "SISTEM BUKA TUTUP PINTU OTOMATIS BERBASIS SUARA," Elinvo (Electronics, Informatics, and Vocational Education), vol. 3, no. 1, pp. 83-91, 2018.
. A. Nazarudin and S. Nuryadi, "SISTEM KENDALI PINTU DAN PERALATAN LISTRIK OTOMATIS DENGAN SENSOR PIR DAN SMS GATEWAY SEBAGAI PENGUNCI SISTEM," University of Technology Yogyakarta (UTY), Yogyakarta, 2018.
D. A. Barus, "Rancang Bangun Gerbang dengan Menggunakan Kontrol Android Via Bluetooth Berbasis Arduino Uno R3," Universitas Sumatera Utara (USU), Medan, 2017.
D. Wiratmoko, "Prototype Sistem Buka Tutup Kunci Pintu Rumah dengan Menggunakan Rfid dan Keypad 4x4 Berbasis Arduino Uno," Universitas Muhammadiyah Surakarta, Surakarta, 2017.
. R. Martin, D. Despa and . M. Mardiana, "Sistem Kendali Palang Pintu Otomatis Menggunakan Barcode Berbasis Mikrokontroler Atmega 328p-Pu Pada Pintu Masuk Perpustakaan Unila," Jurnal Informatika dan Teknik Elektro Terapan, vol. 3, no. 2, 2015.
K. Muslihah, "Pengertian dan cara kerja sensor Passive Infra Red (PIR)," blogspot, 14 Juni 2015. [Online]. Available: http://khoirummuslihah.blogspot.co.id/2015/06/pengertian-dan-cara-kerja-sensor-pir.html.
Anonim, " HomeDocumentsBAB III METODE DAN PERANCANGAN Kabel rangkaian Resistor Kapasitor Kayu dan plastic untuk pembuatan...," Laboratorium Perancangan dan M&R Elektronika Politeknik Negeri Manado, Juni 2013. [Online]. Available: https://dokumen.tips/documents/bab-iii-metode-dan-perancangan-kabel-rangkaian-resistor-kapasitor-kayu-dan-plastic.html.
Belajarelektronika.net, "Pengertian Motor DC, Fungsi, dan Prinsip Kerjanya," Belajar elektronika, 23 Juli 2017. [Online]. Available: https://belajarelektronika.net/pengertian-motor-dc-fungsi-dan-prinsip-kerjanya/.
A. Faudin, "Tutorial Arduino mengakses driver motor L298N," nyebarilmu.com, 27 Agustus 2017. [Online]. Available: https://www.nyebarilmu.com/tutorial-arduino-mengakses-driver-motor-l298n/.
A. Elektro, "Pengertian Dioda LED (Light Emitting Diode)," Belajar Elektronika, 6 Juni 2019. [Online]. Available: https://abdulelektro.blogspot.com/2019/06/pengertian-dioda-led-light-emitting.html.
A. Pangestu, "Pengaruh Program Keselamatan dan Kesehatan Kerja (K3) dan Disiplin Kerja Karyawan Terhadap Produktivitas Kerja Karyawan (Studi Kasus pada PT. Wika Realty Proyek Pembangunan Tamansari Hive Office Park)," UNIVERSITAS ISLAM NEGERI SYARIF HIDAYATULLAH, Jakarta, 2016.
D. Y. A. Yulius , "Studi Theory of Constraints dalam Manajemen Konstruksi pada Proyek Pembangunan Pop Hotel Lampung," FAKULTAS TEKNIK UNILA, Lampung, 2014.
Copyright (c) 2020 Jurnal Qua Teknika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Copyright on any article is retained by the author(s).
- Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License