EVALUASI KINERJA STRUKTUR BANGUNGAN BERTINGKAT 4 LANTAI KAMPUS AKADEMI KOMUNITAS NEGERI (AKN) PUTRA SANG FAJAR BLITAR DENGAN METODE ANALISIS RESPON SPEKTRUM MENGGUNAKAN APLIKASI STAAD PRO

  • Nurjanah Fakultas Teknik Program Studi Teknik Sipil S1, Universitas Islam Balitar.
  • Bahar baihaqi Fakultas Teknik Program Studi Teknik Sipil S1, Universitas Islam Balitar.
https://doi.org/10.35457/quateknika.v13i2.3036
Abstract views: 53 , PDF downloads: 48
Keywords: STAAD Pro, Beam,, Column,, Sloof,, Footplat

Abstract

Campus Akademi Komunitas Negeri (AKN) Putra Sang Fajar Blitar located on sub-district Sananwetan, Blitar City, this integrated lecture building stands on the land of the former Mardiwaluyo Hospital. The campus building has a total of 4 floors that function as an educational building.

The calculation method uses the STAAD Pro progam to determine the results of the analysis of the performance of the building’s structure starting from beams, columns, sloof to foundations.

after the calculation results in a floor slab with a thickness of 12 cm using a 2-way plate system, with K-300 (Fc’) = 24,9 Mpa and steel quality (fy) = 400 Mpa. While the beam is 60 cm x 40 cm, 50 cm x 30 cm, 40 cm x 30 cm, 30 cm x 20 cm with quality concrete K-300 (Fc’) = 24,9. Column size 40 cm x 40 cm and sloof size  60 cm x 30 cm dan 50 cm x 25 cm with quality concrete K-300 (Fc’) = 24,9 lower structure using footplat foundation. From the dimensions above, it is estimated that this reanalysis calculation is more efficient and can reduce project costs.

References

Asroni, Ali.2010. Kolom Fondasi & Balok T Beton Bertulang. Graha Ilmu. Yogyakarta.

Gunawan, Rudi. 1993. Tabel Profil Konstruksi Baja. Kanisius Yogyakarta.

Hakam, Abdul. 2008. Rekayasa Pondasi. CV.Bintang Grafika.

Hardiyatmo, H.C. 2011. Analisis dan Perancangan Fondasi I. Gajah Mada University Press, Yogyakarta.

Hibbeler, R.C. 2002. Edisi Ketiga Analisis Struktur. Jakarta: PT Prenhallindo.

Husnah., dkk.2019. Analisis Struktur Rangka Baja Ringan dan Baja Berat Dengan Aplikasi Bricscad. Jurnal Teknik Sipil. Volume 05.

Hariyono Agus. 2011. “Analisis kinerja struktur pada bangunan bertingkat tidak beraturan dengan analisis dinamik menggunakan metode analisis respon spectrum”. Jurusan Teknik Sipil, Fakultas Teknik, Universitas Sebelas Maret, Surakarta.

Ikhtisoliyah dan Hamid Suroyo. 2017. Analisis Perhitungan Kekuatan Pada Struktur Atap Gedung STG-Boiler Batu Bara. Wahana Teknik. Volume 06.

Lesmana, Hendra., dkk. 2016. Perhitungan Struktur Beton Bertulang Gedung Perkuliahan 7 Lantai Universitas Tanjungpura Pontianak. Teknik Sipil FT UNTAN.

M.Zamora dan R.Riddell. 2011. “Spektrum respon elastis dan inelastis mempertimbangkan efek hampir-kesalahan” Jurnal Teknik Gempa, 15: 775–808, 2011.

Nawanggalam, Purbolaras. 2019. Desain Struktur Bangunan Bagian 1 Atap Rangka Baja. Yogyakarta: Wahana Resolusi.

Oentoeng. 2000. Konstruksi Baja. Yogyakarta: Andi.

SNI 1726-2019 Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung Dan Non Gedung.

SNI 1727-2013 Perhitungan Pembenanan.

Wungo, Willy C. 2019. Pengenalan Sofware Analisa dan Desaign Struktur STAAD Pro. Jakarta: PT Tribuana Bhirawa Yudha.

PlumX Metrics

Published
2023-09-18
How to Cite
nurjanah, & Rozaqi, bahar. (2023). EVALUASI KINERJA STRUKTUR BANGUNGAN BERTINGKAT 4 LANTAI KAMPUS AKADEMI KOMUNITAS NEGERI (AKN) PUTRA SANG FAJAR BLITAR DENGAN METODE ANALISIS RESPON SPEKTRUM MENGGUNAKAN APLIKASI STAAD PRO. Jurnal Qua Teknika, 13(2), 30-44. https://doi.org/10.35457/quateknika.v13i2.3036
Issue
Vol. 13 No. 2 (2023): September 2023
Section
Articles

Copyright (c) 2023 Jurnal Qua Teknika

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Copyright on any article is retained by the author(s).
  2. Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License